I Be Cav Home

R Lover but !a Programmer

Chuck Powell

Using R to ‘drive’ MS Excel

Tagged as: [ ]

RBloggers

================ Chuck Powell 3/27/2018

I have until recently made it a habit to draw a clear distinction about using R for data analysis and Microsoft Excel for other office productivity tasks. I know there are people who use Excel to process data and even (gasp) to teach statistics with it. But I’m a bit snobbish that way and to date all my efforts have been in getting data out of Excel and into R, either by simple methods like read.csv or if the task was more meaty by using Hadley Wickham’s marvelous readxl package.

But this week I got a request that may sound familiar to some of you who work in an environment where the MS Office products are ubiquitous. My colleague wanted to be able to do a little analysis and graphing of a modest sized dataset and they only really had MS Excel experience. To be honest I could have just done the work in R and provided the results but that’s not what they asked for and would have meant I was responsible for future updates and questions. So I decided to just provide the data in the most useful way I could and that led to this post to both document the process and also to potentially help others who have this need in the future.

Along the way I also had some nice learning experiences around functions and both standard and non standard evaluation NSE that I’ll document in some future posts.

Background

My colleague wanted to be able to do some simple analysis around health care using the Centers for Disease Control and Prevention (https://www.cdc.gov), National Center for Health Statistics (https://www.cdc.gov/nchs/index.htm), National Health Interview Survey (https://www.cdc.gov/nchs/nhis/nhis_2016_data_release.htm). They wanted a series of cross tabulated sets of summary data for variable pairings (for example whether or not the respondent had a formal health care provider by region of the country). They wanted one Excel “workbook” with 12 worksheets each one of which was the summary of counts for a pair of variables. From their the could use Excel’s native plotting tools to make the graphs they needed.

A little sleuthing around CRAN helped me discover openxlsx which seems to be quite active, well maintained, and have a variety of features I would need. In my case that involved a download and install first (but I’ll comment it out in this version for you). As long as I’m at it I’ll load dplyr and ggplot2 (they’ll figure more prominently in my next post).

knitr::opts_chunk$set(echo = TRUE, warning = FALSE)
library(dplyr)
## 
## Attaching package: 'dplyr'

## The following objects are masked from 'package:stats':
## 
##     filter, lag

## The following objects are masked from 'package:base':
## 
##     intersect, setdiff, setequal, union
library(ggplot2)
theme_set(theme_bw()) # set theme to my personal preference
# install.packages("openxlsx")
require(openxlsx)
## Loading required package: openxlsx

Download and structure the data

The data my colleague wanted was from 2014 and she was kind enough to provide the URL for a compressed zipfile ftp://ftp.cdc.gov/pub/Health_Statistics/NCHS/Datasets/NHIS/2016/personsxcsv.zip. Full documentation about the file and its contents and the methodology is here https://www.cdc.gov/nchs/nhis/nhis_2016_data_release.htm.

After downloading and uncompressing it into a local project directory (it’s about 77Mb of data, with over 100,000 rows and more than 600 columns). I could go to work on processing it to get what was really needed for my colleague.

FullFile <- read.csv(file = "personsx.csv")
dim(FullFile)
## [1] 103789    606
# 606 variables too many whittle it down with wild cards

A little dplyr to make our life easier

While strictly speaking nothing in the next few steps requires dplyr (they can all be done in base R) I will showcase a couple ways dplyr can make your data analysis faster and easier.

First off call me old-fashioned but I abhor having lots of data in working memory that I know for a fact I’ll never use. While my Mac has plenty of space let’s showcase dplyr’s ability to help us rapidly reduce down to a more manageable dataset. A quick look at the data dictionary provided by the CDC shows we’ll never use any of the variables in the dataset that start with “L” or with “INT” so let’s make them go away.

FullFile <- select(FullFile, -starts_with("L"))
FullFile <- select(FullFile, -starts_with("INT"))
dim(FullFile)
## [1] 103789    289
# 289 is still big but ...

The other we notice is that the variables are all coded as integers when we know they are truly factors. Since we know we’re going to analyze them as factors let’s take a moment to recode which will also mean an opportunity to provide more user friendly labels so we’re not constantly referring to the code book to see what “1” really represents in the data.

The function is recode_factor and allows us to map factor labels onto the integers to provide a more useful dataset.

FullFile$REGION <- recode_factor(FullFile$REGION,
                            `1` = "Northeast",
                            `2` = "Midwest",
                            `3` = "South",
                            `4` = "West")
FullFile$SEX <- recode_factor(FullFile$SEX, `1` = "Male", `2` = "Female")
FullFile$RACERPI2 <- recode_factor(FullFile$RACERPI2,
                              `1` = "White only",
                              `2` = "Black/African American only",
                              `3` = "AIAN only", 
                              `4` = "Asian only",
                              `5` = "Race group not releasable",
                              `6` = "Multiple race")
FullFile$PDMED12M <- recode_factor(FullFile$PDMED12M, `1` = "Yes", `2` = "No")
## Warning: Unreplaced values treated as NA as .x is not compatible. Please
## specify replacements exhaustively or supply .default
summary(FullFile$PDMED12M)
##   Yes    No  NA's 
##  6744 96986    59

Uh oh, what are we being warned about? recode_factor has a nice rational solution for cases where we don’t specify all the possible choices for a variable (see ?recode_factor) it simply assigns them an NA value. In our case that’s just what we want.

Finishing the rest (and suppressing the warnings)…

FullFile$PNMED12 <- recode_factor(FullFile$PNMED12, `1` = "Yes", `2` = "No")
FullFile$PNMED12M <- recode_factor(FullFile$PNMED12M, `1` = "Yes", `2` = "No")
FullFile$NOTCOV <- recode_factor(FullFile$NOTCOV, `1` = "Not covered", `2` = "Covered")
FullFile$COVER <- recode_factor(FullFile$COVER,
                           `1` = "Private",
                           `2` = "Medicaid and other public",
                           `3` = "Other coverage",
                           `4` = "Uninsured",
                           `5` = "Do not know")
FullFile$PLNWRKS1 <- recode_factor(FullFile$PLNWRKS1,
                              `1` = "Through employer",
                              `2` = "Through union",
                              `3` = "Through workplace, but don't know if employer or union",
                              `4` = "Through workplace, self-employed or professional association",
                              `5` = "Purchased directly",
                              `6` = "Through Healthcare.gov or the Affordable Care Act",
                              `7` = "Through a state/local government or community program",
                              `8` = "Other",
                              `9` = "Through school",
                              `10` = "Through parents",
                              `11` = "Through relative other than parents")
FullFile$HCSPFYR <- recode_factor(FullFile$HCSPFYR,
                              `0` = "Zero",
                              `1` = "Less than $500",
                              `2` = "$500 - $1,999",
                              `3` = "$2,000 - $2,999",
                              `4` = "$3,000 - $4,999",
                              `5` = "$5,000 or more")
FullFile$MEDBILL <- recode_factor(FullFile$MEDBILL, `1` = "Yes", `2` = "No")
FullFile$MEDBPAY <- recode_factor(FullFile$MEDBPAY, `1` = "Yes", `2` = "No")
# I am thinking that earnings can be collapsed into three attributes:  low; medium; high
FullFile$EARNINGS <- recode_factor(FullFile$ERNYR,
                              `1` = "$01-$34,999",
                              `2` = "$01-$34,999",
                              `3` = "$01-$34,999",
                              `4` = "$01-$34,999",
                              `5` = "$01-$34,999",
                              `6` = "$01-$34,999",
                              `7` = "$35,000-$74,999",
                              `8` = "$35,000-$74,999",
                              `9` = "$35,000-$74,999",
                              `10` = "$35,000-$74,999",
                              `11` = "$75,000 and over")
# Education the same:  low; medium; high
FullFile$EDUCATION <- recode_factor(FullFile$EDUC1,
                              `0` = "HSchool Grad or less",
                              `1` = "HSchool Grad or less",
                              `2` = "HSchool Grad or less",
                              `3` = "HSchool Grad or less",
                              `4` = "HSchool Grad or less",
                              `5` = "HSchool Grad or less",
                              `6` = "HSchool Grad or less",
                              `7` = "HSchool Grad or less",
                              `8` = "HSchool Grad or less",
                              `9` = "HSchool Grad or less",
                              `10` = "HSchool Grad or less",
                              `11` = "HSchool Grad or less",
                              `12` = "HSchool Grad or less",
                              `13` = "HSchool Grad or less",
                              `14` = "HSchool Grad or less",
                              `15` = "Some college or AA degree",
                              `16` = "Some college or AA degree",
                              `17` = "Some college or AA degree",
                              `18` = "Bachelor's or higher",
                              `19` = "Bachelor's or higher",
                              `20` = "Bachelor's or higher",
                              `21` = "Bachelor's or higher")
# Age also collapsed: low; medium; high
FullFile$AGE <- cut(FullFile$AGE_P,
                    breaks = c(-Inf, 18, 61, Inf),
                    labels = c("Less than 18", "18 to 60", "More than 60"),
                    right = FALSE)
table(FullFile$EDUC1,FullFile$EDUCATION)
##     
##      HSchool Grad or less Some college or AA degree Bachelor's or higher
##   0                  3424                         0                    0
##   1                  1679                         0                    0
##   2                  1633                         0                    0
##   3                  1787                         0                    0
##   4                  1716                         0                    0
##   5                  1822                         0                    0
##   6                  2726                         0                    0
##   7                  1860                         0                    0
##   8                  2644                         0                    0
##   9                  2908                         0                    0
##   10                 2884                         0                    0
##   11                 3186                         0                    0
##   12                 1774                         0                    0
##   13                 2290                         0                    0
##   14                18413                         0                    0
##   15                    0                     14822                    0
##   16                    0                      5413                    0
##   17                    0                      2966                    0
##   18                    0                         0                13883
##   19                    0                         0                 5956
##   20                    0                         0                  955
##   21                    0                         0                 1018
##   96                    0                         0                    0
##   97                    0                         0                    0
##   98                    0                         0                    0
##   99                    0                         0                    0

One easy way to see whether your recoding has had the desired effect is to make a simple table that maps the original values to the new values. That’s what I’ve done here for EDUCATION which shows the collapse of categories and the fact that values like 99 have been mapped to NA.

Finally let’s grab just the variables we really need including the newly recoded versions and make them a new dataset and take the full version out of memory.

OfInterest <- select(FullFile, AGE, REGION, SEX, EDUCATION, EARNINGS, PDMED12M, PNMED12M, NOTCOV, MEDBILL)
str(OfInterest)
## 'data.frame':    103789 obs. of  9 variables:
##  $ AGE      : Factor w/ 3 levels "Less than 18",..: 2 2 2 1 1 2 2 2 3 2 ...
##  $ REGION   : Factor w/ 4 levels "Northeast","Midwest",..: 3 4 4 4 4 4 3 3 4 3 ...
##  $ SEX      : Factor w/ 2 levels "Male","Female": 1 2 1 1 2 2 2 1 1 1 ...
##  $ EDUCATION: Factor w/ 3 levels "HSchool Grad or less",..: 2 1 3 1 NA 3 1 1 3 2 ...
##  $ EARNINGS : Factor w/ 3 levels "$01-$34,999",..: 1 2 2 NA NA 3 1 NA 2 3 ...
##  $ PDMED12M : Factor w/ 2 levels "Yes","No": 2 1 2 2 2 2 2 2 2 2 ...
##  $ PNMED12M : Factor w/ 2 levels "Yes","No": 2 2 2 2 2 2 2 2 2 2 ...
##  $ NOTCOV   : Factor w/ 2 levels "Not covered",..: 2 2 2 2 2 2 2 2 2 2 ...
##  $ MEDBILL  : Factor w/ 2 levels "Yes","No": 2 1 1 1 1 2 2 2 2 2 ...
summary(OfInterest)
##            AGE              REGION          SEX       
##  Less than 18:25680   Northeast:16883   Male  :50257  
##  18 to 60    :58025   Midwest  :20507   Female:53532  
##  More than 60:20084   South    :35826                 
##                       West     :30573                 
##                      EDUCATION                 EARNINGS     PDMED12M    
##  HSchool Grad or less     :50746   $01-$34,999     :20390   Yes : 6744  
##  Some college or AA degree:23201   $35,000-$74,999 :12927   No  :96986  
##  Bachelor's or higher     :21812   $75,000 and over: 6413   NA's:   59  
##  NA's                     : 8030   NA's            :64059               
##  PNMED12M             NOTCOV      MEDBILL     
##  Yes : 4978   Not covered:10506   Yes :16282  
##  No  :98741   Covered    :92181   No  :87096  
##  NA's:   70   NA's       : 1102   NA's:  411  
## 
rm(FullFile)

Driving Excel

Everything we have done so far has been in preparation for actually providing my colleague the data she wanted in Excel so now on to the main event. In this post I am deliberately going to NOT build functions or use ggplot to make the graphs she wanted. Those will be topics for future posts.

You may have noticed that a table is almost exactly what she wants. If the variables of interest are AGE and whether or not the person has health care coverage NOTCOV then the command would be table(OfInterest$AGE,OfInterest$NOTCOV) and we have results we need. The openxlsx provides a write.xlsx function that will accept the table command and produce a properly formatted workbook as output. The code below will produce SimpleExcelExample.xlsx in your working directory. The number of options is legion and ?write.xlsx will display them for you.

table(OfInterest$AGE,OfInterest$NOTCOV)
##               
##                Not covered Covered
##   Less than 18        1312   24193
##   18 to 60            8730   48484
##   More than 60         464   19504
write.xlsx(table(OfInterest$AGE,OfInterest$NOTCOV), file = "SimpleExcelExample.xlsx")

Finishing up the manual way

The last thing I will describe in this post is how to make one workbook with multiple sheets. Where each sheet represents one variable pairing (e.g. AGE by NOTCOV). We’ll even label the tabs (worksheets) in a thoughtful way. So my colleague can easily see which sheet corresponds to which variable pairing.

The code below follows this pattern

  1. Create a new empty workbook object wb <- createWorkbook()
  2. Invent a name for the tab or worksheet inside the workbook NameofSheet
  3. Make a table for a pair of variables TheData <- table(OfInterest$EDUCATION,OfInterest$NOTCOV)
  4. Add a worksheet (tab) into the workbook addWorksheet
  5. Write the table we made onto the worksheet with writeData
  6. Repeat steps 2 through 5 12 times
### Manual and painful way
## Create a new workbook
wb <- createWorkbook()
# education by each of the other 4 variables
NameofSheet <- "CoverageByEducation"
TheData <- table(OfInterest$EDUCATION,OfInterest$NOTCOV)
addWorksheet(wb = wb, sheetName = NameofSheet)
writeData(wb = wb, sheet = NameofSheet, x = TheData, borders = "n")
NameofSheet <- "MedbillByEducation"
TheData <- table(OfInterest$EDUCATION,OfInterest$MEDBILL)
addWorksheet(wb = wb, sheetName = NameofSheet)
writeData(wb = wb, sheet = NameofSheet, x = TheData, borders = "n")
NameofSheet <- "PDMED12MByEducation"
TheData <- table(OfInterest$EDUCATION,OfInterest$PDMED12M)
addWorksheet(wb = wb, sheetName = NameofSheet)
writeData(wb = wb, sheet = NameofSheet, x = TheData, borders = "n")
NameofSheet <- "PNMED12MByEducation"
TheData <- table(OfInterest$EDUCATION,OfInterest$PNMED12M)
addWorksheet(wb = wb, sheetName = NameofSheet)
writeData(wb = wb, sheet = NameofSheet, x = TheData, borders = "n")
# earnings  by each of the other 4 variables
NameofSheet <- "CoverageByEarnings"
TheData <- table(OfInterest$EARNINGS,OfInterest$NOTCOV)
addWorksheet(wb = wb, sheetName = NameofSheet)
writeData(wb = wb, sheet = NameofSheet, x = TheData, borders = "n")
NameofSheet <- "MedbillByEarnings"
TheData <- table(OfInterest$EARNINGS,OfInterest$MEDBILL)
addWorksheet(wb = wb, sheetName = NameofSheet)
writeData(wb = wb, sheet = NameofSheet, x = TheData, borders = "n")
NameofSheet <- "PDMED12MByEarnings"
TheData <- table(OfInterest$EARNINGS,OfInterest$PDMED12M)
addWorksheet(wb = wb, sheetName = NameofSheet)
writeData(wb = wb, sheet = NameofSheet, x = TheData, borders = "n")
NameofSheet <- "PNMED12MByEarnings"
TheData <- table(OfInterest$EARNINGS,OfInterest$PNMED12M)
addWorksheet(wb = wb, sheetName = NameofSheet)
writeData(wb = wb, sheet = NameofSheet, x = TheData, borders = "n")
# age by each of the other 4 variables
NameofSheet <- "CoverageByAge"
TheData <- table(OfInterest$AGE,OfInterest$NOTCOV)
addWorksheet(wb = wb, sheetName = NameofSheet)
writeData(wb = wb, sheet = NameofSheet, x = TheData, borders = "n")
NameofSheet <- "MedbillByAge"
TheData <- table(OfInterest$AGE,OfInterest$MEDBILL)
addWorksheet(wb = wb, sheetName = NameofSheet)
writeData(wb = wb, sheet = NameofSheet, x = TheData, borders = "n")
NameofSheet <- "PDMED12MByAge"
TheData <- table(OfInterest$AGE,OfInterest$PDMED12M)
addWorksheet(wb = wb, sheetName = NameofSheet)
writeData(wb = wb, sheet = NameofSheet, x = TheData, borders = "n")
NameofSheet <- "PNMED12MByAge"
TheData <- table(OfInterest$AGE,OfInterest$PNMED12M)
addWorksheet(wb = wb, sheetName = NameofSheet)
writeData(wb = wb, sheet = NameofSheet, x = TheData, borders = "n")
#
saveWorkbook(wb, "BetterExcelExample.xlsx", overwrite = TRUE) ## save to working directory

All done (not really)

Hopefully this post helps you understand how to use the openxlsx package to have R drive Excel to help you with your data analysis. In my next post I’ll build on this scaffolding to discuss how to make these very same graphs in ggplot2 (which IMHO runs circles around Excel for scientific plotting), as well as making this all more efficient through the use of functions to take care of some of the more repetitive chores.

I hope you’ve found this useful. I am always open to comments, corrections and suggestions.

Chuck (ibecav at gmail dot com)

License

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Written on